Application
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
Feature
- Standard: Lissajous figure.
- Working positions: 4, 6, 8, 9 optional.
- Counting Method: 1) count up. 2) count down.
- The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
- Standard sample holders with 9 and 12kpa weights included.
- PLC, 7 inches color touch screen, Chinese and English operation interface.
- Weights and key components are made up by 316 stainless steel which is well-formed and durable in use.
- To prevent distortion, the top motion plate was special made up by 316 aluminum alloy.
Standards
Abrasion: GB/T 21196.2, GB/T 13775, ISO 12947, ASTM D4966,
IWS TM 112, M﹠S P19, Next 18, SN 198529, TWC 112, JIS L1096, ( ISO17076-2 ball plate method ,optional)
Pilling: GB/T 4802.2, ISO12945-2, ASTM D4970, IWS TM 196, M﹠S P17, Next TM26, SN 198525
Specification
| Model |
GT-C13B-4
|
GT-C13B-6
|
GT-C13B-8
|
GT-C13B-9
|
|
Working positions
|
4 |
6 |
8 |
9 |
|
Control mode
|
PLC control and touch screen display
|
|
Counter range
|
0~999999 times
|
|
Rotational speed
|
50± 2r/min
|
|
Pressing weight
|
Mass : (2.5 ± 0.5) kg
Diameter: Φ(120 ± 10) mm
|
|
Power supply
|
AC220V 50/60Hz
|
|
Holder effective diameter
|
A) Abrasion Holder : Φ(28.65 ± 0.05)mm
B) Pilling Holder : Φ(90 ± 0.10)mm
|
